Mechanical Source Inspector

Wichita, KS
Full Time
TADRA
Experienced

The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations.

Job Responsibilities:

  •  Experienced quality individual in dimensional inspection of aerospace machined components
  •  Experience in performing FAI’s – AS9102
  •  Experience with hand measurement tools
  •  Knowledge of CMM Inspection process
  •  Knowledge and experience in GD&T (ASME Y14.5)
  •  Knowledge and experience with blueprint interpretation
  •  Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
  •  Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation
  •  Process warehouse materials
  •  Rely on instructions and pre-established guidelines/procedures to perform the functions of the job
  •  Support positive corrective actions and identification of root cause
  •  Other duties as assigned.
Required Skills
  •  Experienced quality individual in dimensional inspection of aerospace machined components
  •  Experience in performing FAI’s – AS9102
  •  Experience with hand measurement tools
  •  MS Outlook, and EXCEL experience
  •  Experience with hand measurement gages, conduct conventional inspection to engineering requirements
  •  Knowledge and experience in GD&T (ASME Y14.5)
  •  Knowledge and experience with blueprint interpretation
  • Valid drivers license and auto insurance required.
Additional Desired Skills:
  • Prior practical experience and implementation of Quality inspection tools and equipment.
  • Experience in RCCA, and problem solving
General Requirements
  •  Ability to handle complex situations and solve complex problems
  •  Ability to work effectively under pressure to meet deadlines
  •  Ability to press and analyze technical and business information
  •  Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers
  •  Ability to remain seated for up to 5 hours at a time
  •  Fluent English – reading and writing is required
  •  Professionalism, integrity, and exceptional attention to detail
  •  Strong independent decision-making skills; excellent analytical skills and professional judgment
  •  Excellent interpersonal, written, and verbal communication skills
  •  Must be able to simultaneously manage several objectives
  •  Must be detail oriented, organized, and self-motivated
Additional Qualifications (Preferred):
  •  3+ years’ experience as a quality inspector or technician.
  •  3+ years’ experience in an aerospace manufacturing facility
  •  3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation
  •  Proficient with Microsoft Office products
  •  Effective communication skills
  •  Detail oriented
  •  Any combination of education and experience may be considered
  • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply.
    • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches)
    • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50
    • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location.
  • Valid Driver’s License
  • Valid Auto Insurance
WORKING CONDITIONS
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction.
Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time.
Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others.
Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers.
Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime.
The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.
BENEFITS: 
  • 12 days paid vacation first year, increasing with service years
  • 10 days paid sick time
  • 11 paid holidays
  • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents
  • Champ Plan Wellness and Health
    • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings
    • Participation increases net take home pay $$$ in most instances
    • Free wellness initiatives
    • Free tele-health
    • Free and discounted RX
    • Auto enrollment (unless tax elections result in negative impact)
    • Eligible on the 1st of the month following 30 days of continuous employment
    • requires monthly 10-minute wellness activity participation
  • 401k retirement savings with match
    • Eligible on the first (1st) of the month following 90 days of continuous employment
    • 100% match of 1st 3% contribution
    • 50% match of next 2% contribution
    • IMMEDIATE VESTING
  • Company-provided cell phone, laptop, mobile wi-fi (for business use only)
  • Regular Hourly rate for travel time
  • Direct Pay Travel arrangements for flights, hotels and rental cars
  • Travel Reimbursements direct deposited with each payroll
    • Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business
    • Per diem reimbursements for meals and incidentals
    • Overnight trips - Up to $75
    • Leaving home after 4 pm $40
  • Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business
  • Direct Pay Travel arrangements for flights, hotels and rental cars
  • Travel Reimbursements direct deposited with each payroll
    • Per diem reimbursements for meals and incidentals
    • Overnight trips - Up to $75
    • Leaving home after 4 pm $40
  • $1500 EMPLOYEE REFERRAL BONUS
    • Initial $750 paid upon hire of qualified referred employee (rehires excluded)
    •  Additional $750 paid upon referral’s full completion of 90 days’ employment

Pay Range
$25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer.

Company Overview
TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. 

TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions.  All qualified candidates will receive consideration.  Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*