TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.

Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.

TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.

NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES, DISABLED VETERANS AND OTHER PROTECTED VETERANS

It is the policy of this Company to seek and employ qualified individuals at all locations and facilities, and to provide equal employment opportunities for all applicants and employees in recruiting, hiring, placement, training, compensation, insurance, benefits, promotion, transfer and termination. To acheive this, we are dedicated to taking affirmative action to employ and advance in employment qualified individuals with disabilities, disabled veterans, and other protected veterans.

The objective in adopting the Affirmative Action Programs is to place qualified individuals with disabilities, disabled veterans and other protected veterans in all job classifications. These Affirmative Action Programs are available for inspection by any applicant or employee by contacting the Company's EEO Coordinator, in the Human Resources office, Monday through Friday, 8 am to 5 pm.

Aerospace CMM/NDT Lab Manager

Fort Worth, TX

Full Time

Aerospace

Experienced

Position Summary:

Under general supervision and reporting to the Vice President of NDT and Metrology Services, the the Lab Manager is responsible for the overall leadership, operation, quality, and profitability of the Metrology (CMM inspection) and Non-Destructive Testing (NDT) laboratory. This position ensures compliance with customer requirements, industry standards, accreditation requirements, and company quality objectives while managing personnel, equipment, workflow, and continuous improvement initiatives. The Lab Manager serves as the primary customer-facing point of contact for all service related activities in the Lab.

Essential Functions:

The essential functions include, but are not limited to the following:

Direct daily laboratory operations to ensure efficient scheduling, workflow, and resource utilization.
Oversee and Supervise all Lab Metrology, Dimensional inspection, CMM Inspection/Programming, and NDT; services and personnel.Monitor turnaround times, productivity, and customer delivery performance.
Develop and implement operational procedures and best practices.
Manage laboratory budgets, expenses, and capital equipment investments.
Ensure measurement uncertainty and traceability requirements are maintained.
Lead resolution of technical measurement challenges and customer inquiries.
Ensure compliance with applicable aerospace and customer industry standards
Maintain technician certifications and qualification records.
Support audits and customer reviews of Metrology, CMM and NDT processes.
Ensure calibration and preventive maintenance programs remain current.
Maintain laboratory accreditation requirements and documentation.
Establish performance goals and conduct employee evaluations.
Recruit, train, mentor, and develop technical staff.
Promote a culture of safety, quality, accountability, and customer service.
Interface with customers to understand technical requirements and provide solutions.
Assist with quotations, project planning, and capability assessments.
Support new business opportunities and strategic growth initiatives.
Present technical findings and recommendations to customers and management.
Perform other related job duties as required

Knowledge:

Aerospace accreditations such as NADCAP and AS9100
FAA, EAR, and ITAR standards and regulations
Aerospace NDT methods and certification requirements in accordance with NAS 410
Hexagon and ZEISS equipment and programming
GD&T (ASME Y14.5).
Aircraft Parts and Material Conformity Inspections
OSHA and all Regulatory safety requirements
MS Office

Skills:

Aerospace accreditations such as NADCAP and AS9100
FAA, EAR, and ITAR standards and regulations
Aerospace NDT methods and certification requirements in accordance with NAS 410
Hexagon and ZEISS equipment and programming
GD&T (ASME Y14.5).
Aircraft Parts and Material Conformity Inspections
OSHA and all Regulatory safety requirements
MS Office

Abilities:

Ability to work as an effective team member as well as grow a team
Establish and maintain effective working relationships
Pass pre-hire background check including credit screening

Experience/Education:

Bachelor’s degree in engineering, Engineering Technology, Physical Sciences, Quality, or related technical discipline preferred. Equivalent combination of education and experience may be considered.
7+ years of experience in Metrology, Dimensional Inspection, Quality Assurance, or NDT
5+ years in an Aerospace Service-related Industry
5+ years of Supervisory or Management experience.
Working knowledge and experience with inspection methods, techniques, and protocols

Licenses, Certificates & Other Requirements:

US citizenship required.
Fluent English – reading and writing is required
Pass pre-hire background check including MVR screening
Pass Pre-hire Drug Screening
Reliable transportation - must have current/active drivers' license and auto insurance

WORKING CONDITIONS
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction.
Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time.

Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others.

Environment: Typical manufacturing plant conditions, directly working Quality management team, working with the ADR team, and external customers.

Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime.
The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.

BENEFITS:

12 days paid vacation first year, increasing with service years
10 days paid sick time
11 paid holidays
Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents
Champ Plan Wellness and Health
- Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings
- Participation increases net take home pay $$$ in most instances
- Free wellness initiatives
- Free tele-health
- Free and discounted RX
- Auto enrollment (unless tax elections result in negative impact)
- Eligible on the 1st of the month following 30 days of continuous employment
- requires monthly 10-minute wellness activity participation
401k retirement savings with match
- Eligible on the first (1st) of the month following 90 days of continuous employment
- 100% match of 1st 3% contribution
- 50% match of next 2% contribution
- IMMEDIATE VESTING
Company-provided cell phone, laptop, mobile wi-fi (for business use only)
Regular Hourly rate for travel time
Direct Pay Travel arrangements for flights, hotels and rental cars
Travel Reimbursements direct deposited with each payroll
- Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business
- Per diem reimbursements for meals and incidentals
- Overnight trips - Up to $75
- Leaving home after 4 pm $40
Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business
Direct Pay Travel arrangements for flights, hotels and rental cars
Travel Reimbursements direct deposited with each payroll
- Per diem reimbursements for meals and incidentals
- Overnight trips - Up to $75
- Leaving home after 4 pm $40
$1500 EMPLOYEE REFERRAL BONUS
- Initial $750 paid upon hire of qualified referred employee (rehires excluded)
- Additional $750 paid upon referral’s full completion of 90 days’ employment

Company Overview

TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results.

TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors.

Apply for this position

Required*

First Name*

Last Name*

Email Address*

Phone*

Address

Resume*

We've received your resume. Click here to update it.

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

How many years of aerospace experience do you have?*

How many years of operations management experience do you have?*

What are your compensation requirements?*

Are you willing to travel?*

Do you have present documentation to prove you are a US Citizen?*

What proof of citizenship document will you provide:
•Birth Certificate, issued by a U.S. State (if the person was born in the United States), or by the U.S. Department of State (if the person was born abroad to U.S. citizen parents who registered the child’s birth and U.S. citizenship with the U.S. Embassy or consulate);
•Valid, unexpired U.S. Passport, issued by the U.S. Department of State;
•Certificate of Citizenship, issued to a person born outside the United States who derived or acquired U.S. citizenship through a U.S. citizen parent; or
•Naturalization Certificate, issued to a person who became a U.S. citizen after 18 years of age through the naturalization process.*

Company Policy prohibits visible tattoos and significant body modifications for customer-facing employees. Tattoos may be covered with clothing. Can you comply with this requirement?*

Do you have a valid drivers license and auto insurance?*

How many years of quality experience do you have?

How many years of FAI experience do you have?

How many years of direct management experience with AS9100 Quality Systems do you have?

Do you have APQP experience?

Do you have Source Inspection experience?

The following questions are entirely optional.

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Gender

Race/Ethnicity

Invitation for Job Applicants to Self-Identify as a U.S. Veteran

A “disabled veteran” is one of the following:
- a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
- a person who was discharged or released from active duty because of a service-connected disability.
A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran status

I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability

Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Please check one of the boxes below:

YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Name	Date

Human Check*

Submit Application